home career enquiry sitemap
 
Ball Valve
Gate Valve
Globe Valve
Check Valve
Butterfly Valve
Strainers
Diaphgram
Other Product
 
 
 
 
Globle Valve
 
Flowjet Offer a wide range of globe valves in a variety of sizes, pressure ratings and materials.

Globe valves are linear motion valves with rounded bodies, from which their name is derived. During the opening of the Globe Valve the fluid flows through the space between the Edge of the Disc & the seat. Globe valves are linear motion valves with rounded bodies from which their name is derived. During the opening of the Globe Valve the fluid flows through the space between the Edge of the Disc & the seat. These kind of valves are generally used in industry as fully open or fully closed valve, but they may be used for throttling as long as fine adjustments are not required. Globe valve are ideal choice to

control the gases such as steam. A user can use it for throttling with little modification in plug & seat

Globle Valve

Being a linear operation, and requiring a low operating force to open, globe valves can be readily actuated for remote operation.

Globe valves can be straight through, angle or oblique pattern. the oblique pattern increases the flow coefficient to reduce the pressure drop.

When selecting a globe valve, it is important to consider operating temperature and pressure, media properties, flow requirements, duty requirements, physical limitations and suitability for the environment. When installing it is vital to ensure that the valve is positioned so that the flow is from the bottom of the valve to the top.

 
AVAILABLE IN DIFFERENT TYPES
Variants
Mfg Design BS 1873 /ASME B 16.34
Face To Face Dimension As Per ASME B 16.10 / ISO 5752 / BS 2080 / DIN
End Connection Flange & Butt Weld
SPECIAL FEATURE
Anti-frictional Ball bearings in higher sizes and classes.
Outside screw and yoke construction
valves with backseat arrangement
gland is of self aligning
Deep stuffing box
The Body to Bonnet is male and female joint and ring joint is used in higher classes.
MATERIAL
PART NAME MATERIAL OPTION
Body & Connetion ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
Disc Nut, Stem, Back Seat Bushing, Gland ASTM A 276 410 / A 276 304 / A 276 304L / A 276 316L
Seat Rings Carbon Steel / Stainless Steel
Gland Flange PTFE / GET / Graphite filled PTFE
Stem Nut ASTM A 439 Gr.D2 / Al. Bronze
Gland Packing Graphite Asbestos / Graphoil / PTFE
Bonnet Gasket Corrugated Soft Iron / Corrugated SS / Spiral Wound SS 304 with Asbestos or Graphoil / Octagonal Ring
Gland Eye - Bolt & Nut , Cross Bolts & Nuts Carbon Steel / Stainless Steel
Hand Wheel, Hand Wheel Nut, Grub Screw Carbon Steel
Studs / Bolts ASTM A 193 Gr B7 / A 193 Gr B7M / A 193 Gr B8 / A 193 Gr B8M / A 320 Gr L7
Nut ASTM A 194 Gr B7 / A 194 Gr B7M / A 194 Gr B8 / A 194 Gr B8M / A 194 Gr 4/7