Flowjet Valves : Industrial Valves Manufacutrer

Cast Steel Globe Valve

Flowjet Offer a wide range of globe valves in a variety of sizes, pressure ratings and materials.

Globe valves are linear motion valves with rounded bodies, from which their name is derived. During the opening of the Globe Valve the fluid flows through the space between the Edge of the Disc & the seat. Globe valves are linear motion valves with rounded bodies from which their name is derived. During the opening of the Globe Valve the fluid flows through the space between the Edge of the Disc & the seat. These kind of valves are generally used in industry as fully open or fully closed valve, but they may be used for throttling as long as fine adjustments are not required. Globe valve are ideal choice to control the gases such as steam. A user can use it for throttling with little modification in plug & seat.

Being a linear operation, and requiring a low operating force to open, globe valves can be readily actuated for remote operation.

Globe valves can be straight through, angle or oblique pattern. the oblique pattern increases the flow coefficient to reduce the pressure drop.

When selecting a globe valve, it is important to consider operating temperature and pressure, media properties, flow requirements, duty requirements, physical limitations and suitability for the environment. When installing it is vital to ensure that the valve is positioned so that the flow is from the bottom of the valve to the top.

SIZE RATING

Rating: 150#
450MM Or 18Inches
Rating: 300#
300MM Or 12Inches
Rating: 600#
250MM Or 10Inches
SIZE AND RATINGS
VARIANTS
MANUFACTURING STANDARDS
MFG DESIGN BS 1873 /ASME B 16.34
FACE TO FACE DIMENSION As Per ASME B 16.10 / ISO 5752 / BS 2080 / DIN
END CONNECTION Flange & Butt Weld
KEY FEATURES
  • Anti-frictional Ball bearings in higher sizes and classes.
  • Outside screw and yoke construction
  • Valves with backseat arrangement
  • Gland is of self aligning
  • Deep stuffing box
  • The Body to Bonnet is male and female joint and ring joint is used in higher classes.
MATERIAL
S.NO. PART NAME MATERIAL OPTION
1 BODY&BONNET ASTM A 216 Gr WCB/WCA/WCC/ASTM A 217 Gr WC1/WC6/WC9/C5/C12A/CA15/ASTM A 351 Gr CF8/CF8M/CF3/CF3M/CF8C/CF10/CK20/HK30/ASTM A 352 Gr LCB/LCC/LCA/CA6NM/ASTM B148 C95500/C95800/C95400
2 PLUG 13%CR/STELLITED/ASTM A 351 Gr CF8/CF8M/CF3/CF3M/ASTM B148/C95500/95800/95400
3 stem ASTM A 479 TYPE SS410,SS304,SS316,SS304L,SS316L/FS A 182 F304/F316/F304L/F316L
4 seat ring 13%CR/STELLITED/ASTM A 351 Gr CF8/CF8M/CF3/CF3M/ASTM B148/C95500/95800/95400
5 BACK SEAT ASTM A 479 TYPE SS410,SS304,SS316,SS304L,SS316L/FS A 182 F304/F316/F304L/F316L
6 GLAND BUSH ASTM A 479 TYPE SS410,SS304,SS316,SS304L,SS316L/FS A 182 F304/F316/F304L/F316L
7 Gasket SS316 Sairal Wound Grafite Filer
8 PACKING 100% Grafite
9 Gland flange A105/CARBON STEEL
10 YOKE NUT A105/CARBON STEEL/GUN METAL
11 HAND WHEEL SG IRON/CARBON STEEL
12 HAND WHEEL NUT ASTM A 194 Gr 2H/2HM/6F/7M/8/8A/8CA/8M/8MA/8F/8N/8MNA/
13 BODY&BONNET JOINT STUD ASTM A 193 Gr B5/B6/B7/B7M/B16/B8/B8A/B8C/B8M/B8MN
14 BODY&BONNET JOINT NUT ASTM A 194 Gr 2H/2HM/6F/7M/8/8A/8CA/8M/8MA/8F/8N/8MNA/
15 EYE BOLT A105/A182
16 EYE BOLT NUT ASTM A 194 Gr 2H/8/8M
17 CROSS BOLT ASTM A 193 Gr B7/B7M/B8/B8M
18 CROSS BOLT NUT ASTM A 194 Gr 2H/8/8M
19 STEM NUT ASTM A 479 TYPE SS410,SS304,SS316,SS304L,SS316L/FS A 182 F304/F316/F304L/F316L